|
|
home > Eminence > speakers > 10" > guitar > redcoat series
Eminence "Ramrod" 10" Guitar Speaker
|
|
Pulse Music Price $64.95 each
|
We are Eminence's #1 Dealer in the U.S.A.!!!!
Need help picking the right Eminence speaker??? Use the Eminence tone guide.
The Eminence Ramrod speaker is very loud, gutsy, and meaty tone with singing highs and nice, clear overtones.
The Eminence 10" Ramrod RedCoat Series guitar speaker is available in an 8 ohm impedance rating and can be used in either an open or closed
back cabinet or combo with 1 x 10", 2 x 10" or 4 x 10" configurations. The Ramrod can handle 75 watts of continuous power using a
1.5" copper voice coil, a 30 oz. magnet and pressed steel frame. The frequency response is 80 Hz - 5 kHz with an average sensitivity of 100 dB.
Please see the downloadable PDF specification sheet or details below for complete information including frequency response graph, mounting information and Thiele & Small data.
We have 24 hour online ordering via the shopping cart using credit card or PayPal, or call us toll free at 1.800.753.6694.
All speakers are non-returnable items once seal on the box is broken. Item # RAMROD.
|
Nominal Basket Diameter
Impedance
Power Rating
Resonance
Usable Frequency Range
Sensitivity
Magnet Weight
Magnet Type
Gap Height
Voice Coil Diameter
Basket Material
Mounting Information:
Recommended Enclosure Volume (sealed)
Recommended Enclosure Volume (vented)
Overall Diameter
Baffle Hole Diameter
Front Sealing Gasket
Rear Sealing Gasket
Mounting Holes Diameter
Mounting Holes B.C.D.
Depth
Net Weight
Shipping Weight
Thiele-Small Parameters:
Resonant Frequency (fs)
Impedance (Re)
Coil Inductance (Le)
Electromagnetic Q (Qes)
Mechanical Q (Qms)
Total Q (Qts)
Compliance Equivalent Volume (Vas)
Peak Diaphragm Displacement Volume (Vd)
Mechanical Compliance of Suspension (Cms)
BL Product (BL)
Diaphragm Mass inc. Airload (Mms)
Efficiency Bandwidth Product (EBP)
Voice Coil Overhang (Xmax)
Surface Area of Cone (Sd)
|
10", 254 mm
8 ohms
75 Wrms
101 Hz
80 Hz - 5 kHz
100 dB
30 oz.
Ferrite
0.312", 7.92 mm
1.5", 38.1 mm
Pressed Steel
acceptable
acceptable
10.11", 256.8 mm
9.13", 231.8 mm
fitted as standard
fitted as standard
0.23", 5.7 mm
9.6", 243.8 mm
4.3", 109 mm
5.4 lbs., 2.5 kg
8.3 lbs., 3.8 kg
101 Hz
7.3 ohms
0.39 mH
0.68
10.8
0.64
24.6 liters/0.9 cu. ft.
18 cc
0.13 mm/N
11.5 T-M
19 grams
149
0.5 mm
366.1 cm2
|
|
