Recommended:

Speaker Bag for SRM350v2. Item # SRM350BAG.
Just $59.95 each
|
Recommended:

20' Lo-Z Microphone Cable. Item # LZ20.
Just $13.95
|
|
|
Mackie SRM350v2 Powered Speaker

|
List $699.99
Pulse Music Price $599.95 each

|
|
All Mackie is covered by our 30 day satisfaction & low price guarantee.
Features:
|
 |
2-way bi-amplified, optimized Active loudspeaker system
High-output, titanium dome compression driver
10" Neodymium long-throw low frequency transducer
165W class-D, Fast Recovery LF amp / 30W HF amp
Ultra-wide, smooth dispersion via HF waveguide
Built-in phase accurate 24dB Linkwitz-Riley electronic crossover
Electronic time correction, phase alignment and EQ for studio quality sound
Mic/line input and pass-thru connector
Lightweight for ultimate portability (26 lbs)
Flyable, Pole mountable, Floor wedge-able
|
Sharing the same new technology that makes the SRM350v2 the breakthrough live performance powerhouse that it is, the ultra-compact SRM350v2 is
perfect for when space is at a premium. The SRM350v2 whips live sound into complete submission, giving you more control over your shows than
ever. Thanks to its all-new design—from adding new amps and transducers to a new switching power supply—the SRM350v2 surpasses the performance
of the original SRM350 to deliver pure studio monitor sound at more powerful, full-on loudspeaker levels. It’s even more lightweight than
before, making it ultra-portable. We kept it ultra-affordable, too—even though the SRM350v2 is a complete redesign from inside out, we retained
the musician-friendly price tag. With the SRM350v2, live never sounded so good …or behaved so well.

ULTRA-WIDE DISPERSION
Undoubtedly you’ve been to a show where the sound is all over the map—stand in front of the band, it sounds okay, but move a little to
your left or right and all of a sudden you’ve got mud in your ears. When the SRM350v2 loudspeakers are on stage, no matter where you stand, you
hear sound with impeccable stereo imaging, depth of field and definition—at full-on loudspeaker levels. This is due to the SRM350v2’s
wide dispersion pattern, which is achieved through its multi-cell horn throat aperture. To those of you whose eyes just glazed over, let’s just
tell you what it does—the multi-cell horn throat aperture allows for much wider and more even dispersion of high and mid frequencies, so
whether you’re listening intently front and center, or playing it cool on the perimeter, you’ll hear the same great mix. Want to know more?
Then read on.
The “SRM” Stands for Sound Reinforcement Monitor
Over a decade ago, Greg Mackie and a dedicated team of engineers set out to create a portable loudspeaker that could deliver studio monitor sound
quality. Unlike a relatively small, acoustically controlled studio where the “sweet spot” is well defined, live venues vary greatly, and most are
far from acoustically balanced. Despite the challenges, after two years of extensive research and development, the first Sound Reinforcement
Monitor was born—a loudspeaker that truly lived up to its name. The SRM350v2 continues the SRM450’s tradition of studio monitor sound
quality—and trumps it—to deliver sound that makes any venue seem like a well-tuned studio.
Stunning Bass via Servo Feedback Controlled, all new Neodymium Woofer
Many portable loudspeakers produce lows that lack substance—they just don’t have it in ‘em to give you that chest-pounding punch. But the
SRM350v2 delivers astonishingly deep and defined bass frequencies. In fact, it outperforms the original SRM450, which was renowned for its
ability to deliver real low-down sound. That’s thanks to the SRM350v2’s servo feedback technology combined with its all-new neodymium woofer and 3-inch voice coil.
Based on Mackie's award-winning HR824mk2 studio monitor technology, the servo feedback damping electronic circuit within the SRM450v2 “locks”
the woofer in place with the positive and negative outputs of the amplifier. This creates a solid direct-coupling that allows the
SRM350v2
to deliver extremely deep bass from a small cabinet. And the new neodymium woofer’s magnet is lighter in mass, therefore faster than
ceramics, giving the SRM350v2’s bass more punch. The new longer 3-inch voice coil allows the woofer to handle heat more efficiently, so it
produces a consistently full dynamic range—even at maximum output. So you get full, thumping, detailed lows, even after long hours of use at near-peak volumes.

Super low distortion thanks to Mackie’s own Class-D, Fast Recovery Amplification
With its combination of Class D topology and Fast Recovery circuitry, the
SRM350v2 operates with incredible efficiency, and delivers much more
power and clarity. With this “Class D Fast Recovery amplification,” as we’ve lovingly (and creatively) dubbed the technology, the
SRM350v2
handles maximum volume—and associated heat—with ease, so there’s no unwanted noise, and no thermal problems. Even after hours of sustained
use at near-peak levels, your sound remains clean and your SRM350v2 keeps cool.
Read more.
Legendary Active Electronics
In a passive loudspeaker setup, an external amplifier is connected to a passive crossover inside the speaker, which distributes frequencies
to the transducers. Because power amps and transducers vary widely in sound and quality, trying to match the right power amp with the right
speaker can be challenging, especially if you’re not a professional acoustic technician—or rolling in cash so you can hire one. Our proven
Active design does all the work for you. With our SRM350v2, you get a complete loudspeaker system, with complex electronics and
carefully chosen components, all precisely tuned and tweaked to work together. The result is a loudspeaker with phenomenal sound quality and
power, that’s completely plug-and-play—no EQ needed.
Learn what’s inside.

VERSATILITY
When designing the SRM350v2, we considered every angle. From every angle is just how you can position it, too—pole-mount it from the bottom, fly
it vertically or horizontally via its integrated M10 mounting points, or use it as a wedge monitor. With all this flexibility, it’s the most
versatile portable Active loudspeaker around. And now moving it into place is easier than ever. Weighing in at about 40 pounds—11 pounds
lighter than the original SRM450—you’ll have plenty of strength left over to play after loading in. Plus, the
SRM350v2 retains its rugged,
Mackie “built-like-a-tank” durability, thanks to the polypropylene cabinet—now in a tasty hue of Midnight Blue. So not only do you get a
portable loudspeaker that sounds phenomenal, you get one that’s tough and portable for the road, and handsome enough for the show.
Cabinet weighs 32 pounds. Call 1.800.753.6694 to order by phone. Item # SRM350V2.
|