Recommended:
Carry Bag for PPM series powered mixers. Item # PPMBAG.
Just $59.95 each
|
Recommended:
20' Lo-Z Microphone Cable. Item # LZ20.
Just $13.95
|
|
|
Mackie PPM808S Stereo Powered Mixer
|
List $1,029.99
Pulse Music Price $879.95
|
|
All Mackie is covered by our 30 day satisfaction & low price guarantee.
The point of a powered mixer is power, right? That's why there are two real 600 watt FR Series High-Current amplifiers for a total of
1,200 watts inside every Mackie PPM® Series mixer. They crank out real wattage at any impedance, sound good even when pushed into
clipping, and are legendary for their reliability.
We also built in the industry's first 32-bit digital EMAC™ effects contained in a powered mixer. Developed specifically for PPM mixers,
our
EMAC is equivalent to many outboard effects processors, and offers 16 user-controllable, stunning effects. And since graphic equalizers
are always in a powered mixer's output path, we insanely over-engineered ours with expensive, discrete components,
eliminating the phase distortion that plagues our competitors.
IMMACULATE MIXING
Above all else, the PPM Series mixers sound great. Often copied, but seldom duplicated, our high-headroom, low-noise mic preamps are
legendary the world over for their superior sound quality. That's why we use them in the PPM Series—clean, quiet, superb. Each preamp
channel has its own input Trim control, which provides up to 40dB microphone gain, 20dB line-level gain, or a full 20dB of attenuation
to "pad" those really hot signals. Channels also feature level-set LEDs for easy visual input gain adjustment—just speak, sing, or yell
into the mic and adjust the Trim control until the little green LED blinks. Time to dial in a little channel EQ.
MACKIE QUALITY THROUGHOUT
The PPM 808S has everything you'll need for the gig. Each of the six stereo channel strips feature XLR mic and 1/4" TRS line inputs, TRS
insert jacks, monitor and effects send, 3-band EQ, and an input Trim control with individual level-set LEDs. And you won't need external
effects, thanks to our EMAC 32-bit precision digital effects processor—which sounds great and is as easy to use as a stompbox.
There's even an Effects to Monitor control, so you can give your stage monitors a "wet" mix, totally independent of the Mains. The
output section boasts two of our 600-watt FR (Fast Recovery) power amps, dual 9-band graphic equalizers, 75Hz rumble reduction filters,
a switchable soft-knee compressor, and output level metering.
Features Include:
-
Two 600-watt FR Series High-Current power amps
-
Power amps switchable as stereo Mains or Mains + Monitor
-
8 mic/line channels with master phantom power
-
Two stereo line inputs (on channels 7 and 8)
-
1/4" and XLR connectors on each input
-
1/4" Inserts on channels 1-6
-
Two Aux Sends (MON and EFX)
-
Ingenious "Break" Switch
-
Active 3-band EQ on each channel
-
9-band graphic EQ on Main and Monitor outputs
|
We accept  payments!!! Simply select PayPal at the payment section of the shopping cart checkout.
Weighs 36 pounds. Call 1.800.753.6694 to order by phone. Item # PPM808S.
|
